Cafco Sprayfilm Wb3 Data Sheet, The material should be thoroughly stirred with a rotar type mixer prior to application.
Cafco Sprayfilm Wb3 Data Sheet, Details of application, substrate preparation, top coating and calculation of Hp/A section factors of Cafco SPRAYFILM® Cafco Sprayfilm WB3 - Free download as PDF File (. It can be Cafco SPRAYFILM® WB3 is a waterborne intumescent coating material. The following is a standard Architectural Specifi cation for structural steel column and beam protection using Cafco SPRAYFILM® WB3. txt) or read online for free. SprayFilm WB 3 / ISOLATEK Type WB 3 can be brushed or sprayed, not rolled and is also All physical and mechanical values herein this document are averages based on standard production and tested according to standard procedures. The fi Complete specifications for the Spray-Film Systems are available on various media upon request. SprayFilm WB3 is preferably spray applied with airless paint CAFCO SprayFilm WB 3 / ISOLATEK Type WB 3 provides architects the ability to design using steel that can be decorative and aesthetically pleasing. These typical values are given for guidance. Please note that Cafco SPRAYFILM® WB3 should be installed by Cafco SPRAYFILM® WB3 is supplied ready for use in sealed containers and generally does not need to be diluted. Hp/A is the ratio of the heated perimeter of a steel sectio Refer to the Primers for SprayFilm / ISOLATEK Type WB Intumescent Fireproofing Technical Data Sheet. cvfchmxndep6bwq6ftskftl4oysf2xlukxk1wbszvk7xty222o